小型燃煤机组烟气重金属排放特征研究

100 MW以下燃煤机组呈单台容量小、总台数大的特点,是燃煤重金属污染的主要排放源之一.选择7台12 MW燃煤机组,采用美国环境保护局Method 29法现场检测燃煤机组烟气重金属排放浓度,分析烟气中Hg、Pb、Cr、As的排放特征;采集机组产生的飞灰和底灰,分析除尘技术对重金属的富集特性.结果表明:100 MW以下燃煤机组烟气中重金属经脱硝除尘脱硫装置协同控制后,ρ（Hg）为0.20~0.44 μg/m3,烟气Hg以气态形式存在,其占比为100.0%;ρ（Pb）为0.5~2.6 μg/m3,烟气Pb主要以气态形式存在,其占比为38.7%~92.1%;ρ（As）为0.6~3.0 μg/m3,烟气As主要以气态形式存在,其占比为67.8%~100.0%;ρ（Cr）为3.6~23.9 μg/m3,烟气Cr主要以颗粒态形式存在,其占比为65.8%~99.2%.飞灰富集Hg、Pb、Cr、As的能力大于底灰.重金属主要富集于飞灰中的细颗粒物中,采取除尘技术可有效协同控制烟气中的Hg、Pb、Cr、As;飞灰中重金属元素Hg、Pb相对富集系数均与煤中硫含量呈负相关,半干法脱硫+袋式除尘技术对飞灰富集Hg有促进作用.小型燃煤机组烟气重金属Hg、Pb、Cr、As的排放因子分别为0.002 2~0.005 1、5~17、42~160、7~24 mg/t.研究显示,100 MW以下燃煤机组与100 MW及以上燃煤机组烟气重金属Hg、Pb、Cr、As排放特征不同,100 MW以下燃煤机组烟气Hg排放浓度较小,二者烟气Pb、Cr、As排放浓度相近,选用湿式电除尘技术可进一步降低烟气Hg、Pb、Cr、As的排放浓度.      

哈尔滨近地面O3浓度特征

伴随着经济发展和城镇化进程的加速,很多城市的臭氧浓度存在超标问题.本文选取2014—2017年哈尔滨城区污染数据及气象要素数据,对哈尔滨近地面层O_3时空分布特征及其与气象要素的关系进行了分析,结果表明:哈尔滨O_3日内单峰分布,最高值出现在下午14:00,最低值在清晨7:00.空间分布东南部最高,其次是南部,城中区较低.日间周末的近地面O_3浓度较高,而夜间工作日的O_3浓度较高.哈尔滨O_3浓度与平均气温正相关,与相对湿度负相关,与低于37 W·m~(-2)的紫外辐射正相关.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

原煤二氯甲烷浸取液中多环芳烃分布特征

本文用色谱／质谱／红外联用系统研究了原煤二氯甲烷浸取液中多环芳烃的种类、数量、含量及其分布特征。为进一步研究煤燃烧排放飞灰、烟气、炉渣中多环芳烃分布打下良好基础。     

城市大气中颗粒物的研究现状及健康效应

综述了大气尘(TSP、PM10、PM2.5)的研究现状,重点围绕TSP、PM10、PM2.5的物理特征、化学组成(有机组成、重金属元素的总含量及其各化学形态分布)及其源解析进行描述,也提及了大气颗粒物与健康的关系.     

广东省地方污染物排放标准的特点

介绍了广东省地方污染物排放标准中的《水污染物排放限值》和《大气污染物排放限值》的主要特点 ,对今后标准修订提出了建议     

Seasonal characteristics of haze observed by continuous visibility monitoring in the urban atmosphere of Kwangju, Korea

Continuous visibility monitoring has been carried out inKwangju, Korea since May 1999. The total light extinctioncoefficient b _ext measured by a transmissometer andreveals seasonal trends in urban visual air quality,especially under hazy conditions with a visual range of lessthan 15 km. Seasonal atmospheric visibility under lowrelative humidity during the winter was observed to be betterthan during any other seasons. Summertime visibility wasseverely degraded due to highly increased light scattering byhygroscopic particles under high humidity atmosphericconditions. Visibility during spring and fall was alsomoderate. However, yellow sand in spring caused the lowestvisibility conditions over the measurement area for a fewdays. With continuous monitoring using the transmissometer,the daily average seasonal visual range was measured to be13.1, 9.2, 11.0, and 13.9 km in spring, summer, falland winter, respectively. Under the atmospheric humiditycondition less than 60%, visual range was observed tobe 16.1, 13.9, 15.1, and 16.6 km in spring, summer,fall, and winter, respectively. The mean light extinctionbudget by sulfate and nitrate aerosols was determined to bethe highest value of 63.71% during the summer and thelowest value of 27.08% during spring. During the `yellow sand dust' period, a mean light extinction budget by soil particles was estimated to be at an unusually high value of 44.22%.     

内蒙古某灌域表层土壤六氯环己烷空间分布特征及影响因素

为修复灌区内土壤有机氯农药污染，降低六氯环己烷对土壤环境的危害，对内蒙古某灌域表层土壤进行采样，利用气相色谱测定50个土壤样品中六氯环己烷及其异构体的含量，并利用ArcGIS空间分析技术确定表层土壤中六氯环己烷的分布状况。样本中六氯环己烷的检出率为96%，各样本中六氯环己烷的浓度范围为未检出~23.0 ng/g，平均浓度为4.4 ng/g。4种异构体含量平均值顺序为γ-六氯环己烷>δ-六氯环己烷>β-六氯环己烷>α-六氯环己烷。灌域东北部和西南部残留浓度较高，并由这2个方向向中部地区逐渐递减，表层土壤中的六氯环己烷分布受土壤黏粒量、不同种植种类和灌溉水源的影响较大。虽受人类耕作的影响，但表层土壤中的六氯环己烷污染水平相对较低。     

Soil properties and crop productivity as influenced by flyash incorporation in soil

Field experiments were carried out during 1996–97at Gulawathi, Muthiani and Salarpur Villages, IARI Farm, NewDelhi and NCPP Campus, Dadri to evaluate changes in soilcharacteristics and growth of wheat (Triticum aestivum L.),mustard (Brassica juncea L.), lentil (Lence esculentaMoench.), rice (Oryza sativa L.) and maize (Zea mays L.) byvarying amounts of flyash addition (up to 50t ha^-1) in soils atsowing/transplanting time of crops. Flyash addition in areasadjoining NCPP Thermal Power Plant, Dadri, Ghaziabad, U.P.ranged from 5–12 t ha^-1 yr^-1 in 1995–96. Shoot and root growthand yield of test crops at different locations after flyashincorporation resulted in beneficial effects of flyashaddition in most cases. The silt dominant texture of flyashimproved loamy sand to sandy loam textures of the surfacesoils at the farmers' fields. The increased growth in yield ofcrops with flyash incorporation was possibly due tomodifications in soil moisture retention and transmissioncharacteristics, bulk density, physico-chemical characterssuch as pH and EC and organic carbon content. The response offlyash addition in the soil on soil health and cropproductivity needs to be evaluated on long-term sustainableaspects.     

Improvement of the antifouling characteristics in a bioreactor of polypropylene microporous membrane by the adsorption of Tween 20

Surface modification by physical adsorption of Tween 20 was accomplished on polypropylene microporous membranes (PPMMs). Attenuated total reflection-Fourier transform infrared spectroscopy (ATR/FT-IR) and scanning electron microscope (SEM) were used to characterize the chemical and morphological changes on the membrane surfaces. Water contact angles and relative pure water fluxes were measured. The data showed that the hydrophilic performance for the modified membranes increased with the increase in the adsorption amount of Tween 20 onto the surface or into the pores of polypropylene microporous membranes. To test the antifouling property of the membranes by the adsorption of Tween 20 in a membrane bioreactor (MBR), filtration for active sludge was performed using synthetic wastewater. With the help of the data of water fluxes and the FE-SEM photos of the modified PPMMs before or after operating in a MBR for about 12 d, the PPMMs with monolayer adsorption of Tween 20 showed higher remained flux and stronger antifouling ability than unmodified membrane and other modification membranes studied.